Skip to content
1 / 6
1 / 6
2023 Pronar 20.55GH

Overview

Year
2023
Make
Pronar
Model
20.55GH
Hours
280 hrs
Category
Other Equipment
Stock #
A6493259
Serial #
XX0188
Location
Charlotte, NC

Description

This tracked trommel screen is a 2023 Pronar 20.55GH, currently held in Charlotte, NC. The hour meter read 280 hours when it was listed. Ask us and we will walk out to the machine and read it again.

Options listed with this unit include Cat 6 Cylinder 3.6 L Diesel Engine, 39.4 in Wide Fines Discharge Conveyor, Radio Remote Control and 39.4 in Wide Left Discharge Conveyor.

Stock number A6493259; serial XX0188. One unit only - contact us to arrange a look or to price transport.

Features & options

  • Cat 6 Cylinder 3.6 L Diesel Engine
  • Requires Diesel Exhaust Fluid
  • Pronar 51 ft x 12 ft 10 in Belt Feeder MPB 20.55GH 18 ft x 6 ft 7 in Single Deck Trommel Screen
  • 51 in Wide Feed Conveyor
  • 39.4 in Wide Fines Discharge Conveyor
  • 51 in Wide Under Screen Conveyor
  • 39.4 in Wide Left Discharge Conveyor
  • 35.4 in Wide End Discharge Conveyor
  • Radio Remote Control
  • Auto Lube
  • 20 in Triple Grouser Track Shoes

Specifications

Serial Number / VINXX0188
CE MarkCE Marked
Hour Meter / Odometer280 hrs
GaugesOperational
Limited Function CheckThe main components are in place and operational as noted.
Emissions StatusNo US EPA Label Present
Emission Certification LabelNone found
Blow by @ idle (subjective visual observation)Can’t perform without spray back
StarterOperational
Oil LeaksNo dripping leaks
Fuel LeaksNo dripping leaks
Cooling System LeaksNo dripping leaks
Limited Function Check (Engine)The engine started and ran.
Power Travel Drive System2 Travel Speeds, Travels properly
Limited Function CheckThe hydraulic system was operational.
Feed HopperLength @ top: 12 ft 10, Width @ top: 7 ft 4
Feed Conveyor Condition51 in wide feed belt
Feed Conveyor Drive MotorNot operationally checked
Discharge Conveyor Drive MotorNot operationally checked
Screen DeckNumber of decks: 1
Left Grouser Height19 mm
Left Track BushingsBushings have not been turned
Right Grouser Height19 mm
Right Track BushingsBushings have not been turned

Specifications are manufacturer reference values and may vary by configuration. Please confirm critical specs before purchase.

Located in Charlotte, NC

Delivered to your site for a flat $550 anywhere in the contiguous US.

View on map

Talk to a specialist

Make an offer or ask a question

Talk to an equipment specialist about this other equipment — pricing, inspection reports, payment or delivery.

We typically reply within one business hour. See our privacy policy.

You may also like

Similar other equipment

2023 Pronar 20.55GH Tracked Trommel Screen

$265,000