Used
6 photosStock # A8577194
2023 MGI 830 Pile Driver
- Make
- MGI
- Year
- 2023
- Hours
- 343 hrs
- Location
- Grandview, MO
$65,000
Excl. tax
In stock
1 / 6
Overview
- Year
- 2022
- Make
- MGI
- Model
- 830
- Hours
- 388 hrs
- Category
- Drills
- Stock #
- B9808061
- Serial #
- 1185
- Location
- Grandview, MO
Description
Here is a 2022 MGI 830 pile driver, in the yard in Grandview, MO. It showed 388 hours on the clock when we took it in. Ask us and we will walk out to the machine and read it again.
By the numbers it is listed with an operating weight of 18,000 lbs and a maximum drilling depth of 30 feet. It also lists a maximum drilling diameter of 5 inches and a transport length of 19 feet. Treat those as model reference figures and confirm the critical ones against the machine.
Among the options recorded for it are Yanmar 4 Cylinder Diesel Engine and 12 in Rubber Tracks.
Stock number B9808061; serial 1185. One unit only - contact us to arrange a look or to price transport.
Features & options
- 2021 US EPA Label
- Yanmar 4 Cylinder Diesel Engine
- 12 in Rubber Tracks
Specifications
| Engine Power | 131 hp |
|---|---|
| Displacement | 276 cu in |
| Fuel Capacity | 60 gallons |
| Maximum Drilling Depth | 30 feet |
| Maximum Drilling Diameter | 5 inches |
| Operating Weight | 18,000 lbs |
| Transport Length | 19 feet |
| Transport Width | 8 feet |
| Transport Height | 9.5 feet |
| Drill Rotation Speed | 120 rpm |
| Serial Number / VIN | 1185 |
| Hour Meter / Odometer | 388 hrs |
| Engine Oil Pressure | The gauge registers in the operating range. |
| Warning Lights | Operational |
| Gauges | Operational |
| Limited Function Check | The main components are in place and operational as noted. |
| Emissions Status | 2021 US EPA Label |
| Starter | Operational |
| Oil Leaks | No dripping leaks |
| Fuel Leaks | No dripping leaks |
| Cooling System Leaks | No dripping leaks |
| Limited Function Check | The engine started and ran. |
| Limited Function Check (Drivetrain-Track) | The drivetrain was operational without a load. |
| Hydraulic Motors | Not operationally checked |
| Limited Function Check | The hydraulic system was operational. |
| Grouser Height Measurement | Left side: 22 mm, Right side: 22 mm |
| Track Belt Condition | No visible damage |
| Rubber Belt Drive Lugs | No visible damage |
| Track Tensioners | No visible damage |
Specifications are manufacturer reference values and may vary by configuration. Please confirm critical specs before purchase.
Located in Grandview, MO
Delivered to your site for a flat $550 anywhere in the contiguous US.
Talk to a specialist
Make an offer or ask a question
Talk to an equipment specialist about this drills — pricing, inspection reports, payment or delivery.
You may also like
Similar drills
Used
6 photosStock # A5363037
2023 MGI 830 Pile Driver
- Make
- MGI
- Year
- 2023
- Hours
- 418 hrs
- Location
- Grandview, MO
$65,000
Excl. tax
In stock
Used
6 photosStock # A0063270
2023 MGI 830 Pile Driver
- Make
- MGI
- Year
- 2023
- Hours
- 336 hrs
- Location
- Grandview, MO
$65,000
Excl. tax
In stock
Used
6 photosStock # A9769481
2022 MGI 830 Pile Driver
- Make
- MGI
- Year
- 2022
- Hours
- 570 hrs
- Location
- Grandview, MO
$65,000
Excl. tax
In stock
Used
6 photosStock # A4109650
2023 MGI 830 Pile Driver
- Make
- MGI
- Year
- 2023
- Hours
- 522 hrs
- Location
- Grandview, MO
$65,000
Excl. tax
In stock
Used
6 photosStock # A6044813
2000 Ditch Witch JT7020M1 Directional Drill
- Make
- Ditch Witch
- Year
- 2000
- Hours
- 9,603 hrs
- Location
- Bronson, TX
$60,000
Excl. tax
In stock
Used
6 photosStock # A8812873
2000 Ditch Witch JT70M1 Directional Drill
- Make
- Ditch Witch
- Year
- 2000
- Hours
- 7,477 hrs
- Location
- Bronson, TX
$60,000
Excl. tax
In stock
UsedReduced
6 photosStock # A5569648
2017 Vermeer D23X30III Directional Drill
- Make
- Vermeer
- Year
- 2017
- Hours
- 3,890 hrs
- Location
- , FL
$89,000
$74,000
Excl. tax
In stock
2022 MGI 830 Pile Driver
$65,000