
Stock # A8296434
2007 Morbark Hurricane 18 Tow-Behind Wood Chipper
- Make
- Morbark
- Year
- 2007
- Hours
- 2,492 hrs
- Location
- Dunnigan, CA
$55,000
Excl. tax
In stock
This tri/a horizontal grinder is a 2006 Morbark 6600 Wood Hog, currently held in Florida. The hour meter read 17,038 hours when it was listed. Ask us and we will walk out to the machine and read it again.
On the spec sheet it carries a listed weight of 76,500 lbs and a rotor length of 66 inches. It also lists a feed opening of 66 x 50 inches and a height (transport) of 12 ft. Those are reference values for the model and can vary by configuration, so confirm anything critical with us first.
Options listed with this unit include Air Ride, 40 in Discharge Conveyor, Tri/A Carrier and Hydraulic Leveling.
Stock number A5060843 (serial 1861096). Available as a single unit out of Florida - we can arrange inspection or transport.
| Engine Power | 1000 hp |
|---|---|
| Fuel Type | Diesel |
| Rotor Length | 66 inches |
| Rotor Diameter | 36 inches |
| Feed Opening | 66 x 50 inches |
| Hopper Capacity | 7.5 cubic yards |
| Weight | 76,500 lbs |
| Length (Transport) | 43 ft |
| Width (Transport) | 11.5 ft |
| Height (Transport) | 12 ft |
| Maximum Throughput | 200 tons/hr |
| Serial Number / VIN | 1861096 |
| CE Mark | No CE mark found |
| Hour Meter / Odometer | 17038 hrs |
| Exterior Lights | Not operationally checked |
| Current Safety Manual | No |
| Current Operator/Maintenance Manual | No |
| Oil Pressure | The gauge registers in the operating range. |
| Warning Lights | Operational |
| Gauges | Operational, Glass is broken |
| Limited Function Check | The main components are in place and operational as noted. |
| Emissions Status | No US EPA Label Present |
| Blow-by (subjective visual observation) | Visible |
| Starter | Operational |
| Exhaust System | Top pipe is rusted through |
| Oil Leaks | No dripping leaks |
| Fuel Leaks | No dripping leaks |
| Cooling System Leaks | No dripping leaks |
| Limited Function Check | The engine started and ran. |
| Feed Table | 16 ft long x 66 in wide feed table |
Specifications are manufacturer reference values and may vary by configuration. Please confirm critical specs before purchase.
Delivered to your site for a flat $550 anywhere in the contiguous US.
Talk to a specialist
Talk to an equipment specialist about this forestry equipment — pricing, inspection reports, payment or delivery.
You may also like

Stock # A8296434
$55,000
Excl. tax
In stock

Stock # A0894317
$455,000
Excl. tax
In stock

Stock # A0371030
$505,000
Excl. tax
In stock

Stock # A8465752
$590,000
Excl. tax
In stock

Stock # A5442098
$237,000
Excl. tax
In stock

Stock # A3346989
$240,000
Excl. tax
In stock

Stock # A8375571
$240,000
Excl. tax
In stock

Stock # A4458065
$177,500
Excl. tax
In stock
2006 (unverified) Morbark 6600 Wood Hog Tri/A Horizontal Grinder
$235,000