Used
6 photosStock # A8474561
1998 Cat 615C Motor Scraper
- Make
- Caterpillar
- Year
- 1998
- Hours
- 3,171 hrs
- Location
- Rogers, AR
$70,000
Excl. tax
In stock
1 / 6
Overview
- Year
- 1970
- Make
- Caterpillar
- Model
- 631C
- Category
- Scrapers
- Stock #
- A5661888
- Serial #
- 67M3491
- Location
- Cumming, GA
Description
This 1970 Caterpillar 631C motor scraper is on the ground in Cumming, GA. There is no meter figure on file for this one - ask and we will read it off the machine.
Reference data for this model shows a 8 Speed transmission. Those are reference values for the model and can vary by configuration, so confirm anything critical with us first.
It is listed with Open Operator Station and 33.25-35 Tires.
Our stock number is A5661888 and the serial is 67M3491. Call with your questions, or ask for a delivered price to your job.
Features & options
- Open Operator Station
- 33.25-35 Tires
Specifications
| Serial Number / VIN | 67M3491 |
|---|---|
| Hour Meter / Odometer | Meter reading could not be obtained |
| Exterior Lights | Not operational |
| Seat Belts | Inoperable |
| Current Safety Manual | No |
| Current Operator/Maintenance Manual | No |
| Engine Oil Pressure | The gauge registers in the operating range. |
| Warning Lights | Inoperable |
| Gauges | Tachometer gauges are inoperable |
| Limited Function Check | The main components are in place and operational as noted. |
| Engine | No US EPA Label Present |
| Emission Label | No label present |
| Blow-by (subjective visual observation) | Minor |
| Starter | Operational |
| Oil Leaks | No dripping leaks |
| Fuel Leaks | No dripping leaks |
| Cooling System Leaks | No dripping leaks |
| Limited Function Check | The engine started and ran. |
| Transmission Type | 8 Speed |
| Transmission | Operational |
| Limited Function Check - Scraper | The drivetrain was operational without a load. |
| Limited Function Check | The drivetrain was operational without a load. |
| Hydraulic Tank | Hydraulic tank is over filled. |
| Ejector Cylinder | Dripping leak |
| Limited Function Check | The hydraulic system was operational. |
| Ejector Face Condition | Worn with patches welded on the face. |
| Apron Condition | Heavy wear |
| Apron Trunnions | Trunnion balls need to be replaced. |
| Cutting Edges | Heavy wear, Reversible - turned |
| Limited Function Check | The main chassis components functioned with wear in the pivot points. |
Specifications are manufacturer reference values and may vary by configuration. Please confirm critical specs before purchase.
Located in Cumming, GA
Delivered to your site for a flat $550 anywhere in the contiguous US.
Talk to a specialist
Make an offer or ask a question
Talk to an equipment specialist about this scrapers — pricing, inspection reports, payment or delivery.
You may also like
Similar scrapers
Used
6 photosStock # A7494922
2016 Cat 627K Motor Scraper
- Make
- Caterpillar
- Year
- 2016
- Hours
- 7,711 hrs
- Location
- Morgantown, PA
$465,000
Excl. tax
In stock
Used
6 photosStock # A7074960
2015 Cat 627K Motor Scraper
- Make
- Caterpillar
- Year
- 2015
- Hours
- 8,555 hrs
- Location
- Morgantown, PA
$465,000
Excl. tax
In stock
Used
6 photosStock # A9530176
1998 Terex TS14B Motor Scraper
- Make
- Terex
- Year
- 1998
- Hours
- 1,568 hrs
- Location
- Anderson, IN
$35,000
Excl. tax
In stock
Used
6 photosStock # A8727471
2005 John Deere 1814E 6 Tire Hydraulic Pull Scraper
- Make
- John Deere
- Year
- 2005
- Location
- Colorado Springs, CO
$33,000
Excl. tax
In stock
Used
6 photosStock # A2801738
2006 Reynolds 17CS12 4 Tire Hydraulic Pull Scraper
- Make
- Reynolds
- Year
- 2006
- Location
- , MS
$25,000
Excl. tax
In stock
Used
6 photosStock # A2723519
1997 Reynolds 17C 6 Tire Hydraulic Pull Scraper
- Make
- Reynolds
- Year
- 1997
- Location
- , MS
$25,000
Excl. tax
In stock
Used
6 photosStock # A4551557
2001 Crabtree 6 Tire Hydraulic Pull Scraper
- Make
- Crabtree
- Year
- 2001
- Location
- , MS
$25,000
Excl. tax
In stock
1970 Cat 631C Motor Scraper
$35,000